先贴出dts全文(内核linux4.19.222)

分两个文件-一个是s5pv210-smdkv210.dts

另个一是s5pv210.dtsi

第一个dts

// SPDX-License-Identifier: GPL-2.0

/*

* Samsung's S5PV210 SoC device tree source

*

* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.

*

* Mateusz Krawczuk

* Tomasz Figa

*

* Board device tree source for YIC System SMDV210 board.

*

* NOTE: This file is completely based on original board file for mach-smdkv210

* available in Linux 3.15 and intends to provide equivalent level of hardware

* support. Due to lack of hardware, _no_ testing has been performed.

*/

/dts-v1/;

#include

#include "s5pv210.dtsi"

/ {

model = "YIC System SMDKV210 based on S5PV210";

compatible = "yic,smdkv210", "samsung,s5pv210";

chosen {

bootargs = "console=ttySAC0,115200n8 root=/dev/nfs nfsroot=192.168.88.8:/home/zhi/s5pv210/rootfs,v3 rw ip=192.168.88.123:192.168.88.8:192.168.88.1:255.255.255.0::eth0:off rw root wait ignore_loglevel earlyprintk"; //"console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";

};

memory@30000000 {

device_type = "memory";

reg = <0x30000000 0x20000000>;

};

/*

ethernet@88000000 {

compatible = "davicom,dm9000";

reg = <0x88000000 0x2 0x88000004 0x2>;

interrupt-parent = <&gph0>;

interrupts = <7 4>;

local-mac-address = [50 60 de ad be ef];

davicom,no-eeprom;

clocks = <&clocks CLK_SROMC>;

clock-names = "sromc";

};

*/

backlight {

compatible = "pwm-backlight";

pwms = <&pwm 3 5000000 0>;

brightness-levels = <0 4 8 16 32 64 128 255>;

default-brightness-level = <6>;

pinctrl-names = "default";

pinctrl-0 = <&pwm3_out>;

};

/*

srom-cs2@e8000000 {

compatible = "simple-bus";

#address-cells = <1>;

#size-cells = <1>;

reg = <0xe8000000 0x80>;

ranges;

nand: nand@B0E00000 {

compatible = "samsung,s5pv210-nand";

reg = <0xb0e00000 0x2000>,

interrupt-parent = <&vic1>;

interrupts = <31>;

clocks = <&clocks CLK_SROMC>;

clock-names = "nand";

#address-cells = <1>;

#size-cells = <1>;

status = "okay"; // "disabled";

};

};

*/

};

&xusbxti {

clock-frequency = <24000000>;

};

&xxti {

clock-frequency = <24000000>;

};

&pinctrl0 {

srom_ctl: srom-ctl {

samsung,pins = "mp01-1", "mp01-6",

"mp01-7", "mp02-2";

samsung,pin-function = ;

samsung,pin-drv = ;

};

srom_ebi: srom-ebi {

samsung,pins = "mp04-0", "mp04-1", "mp04-2", "mp04-3",

"mp04-4", "mp04-5", "mp04-6", "mp04-7",

"mp05-0", "mp05-1", "mp05-2", "mp05-3",

"mp05-4", "mp05-5", "mp05-6", "mp05-7",

"mp06-0", "mp06-1", "mp06-2", "mp06-3",

"mp06-4", "mp06-5", "mp06-6", "mp06-7",

"mp07-0", "mp07-1", "mp07-2", "mp07-3",

"mp07-4", "mp07-5", "mp07-6", "mp07-7";

samsung,pin-function = ;

samsung,pin-pud = ;

samsung,pin-drv = ;

};

nandc_ctl: nandc-ctl {

samsung,pins = "mp01-2", "mp03-0", "mp03-1",

"mp03-2", "mp03-3", "mp03-4";

samsung,pin-function = ;

samsung,pin-pud = ;

samsung,pin-drv = ;

};

nandc_ebi: nandc-ebi {

samsung,pins =

"mp06-0", "mp06-1", "mp06-2", "mp06-3",

"mp06-4", "mp06-5", "mp06-6", "mp06-7";

samsung,pin-function = ;

samsung,pin-pud = ;

samsung,pin-drv = ;

};

};

&sromc {

pinctrl-names = "default";

pinctrl-0 = <&srom_ctl>, <&srom_ebi>;

status = "okay";

ethernet@1,0 {

compatible = "davicom,dm9000";

reg = <1 0 2 /* addr */

1 4 2>; /* data */

interrupt-parent = <&gph0>;

interrupts = <7 4>;

local-mac-address = [50 60 de ad be ef];

davicom,no-eeprom;

reg-io-width = <2>; //16位模式

samsung,waitable;

samsung,srom-timing = <0 0 1 3 1 0>;

};

};

&nandc {

status = "okay"; // "disabled";

samsung,nandc-tacls=<1>;

samsung,nandc-twrph0=<2>;

samsung,nandc-twrph1=<1>;

nand@0 {

nand-ecc-step-size = <512>; //每页2k,每512字节生成ecc,需要16自己存储

nand-ecc-strength = <8>; //最大8bit的纠错位数,每页需要64字节的oob存储

nand-ecc-mode = "hw";

nand-on-flash-bbt;

nand-is-boot-medium;

nand-bus-width = <8>;

pinctrl-names = "default";

pinctrl-0 = <&nandc_ctl>, <&nandc_ebi>;

partitions {

compatible = "fixed-partitions";

#address-cells = <1>;

#size-cells = <1>;

partition@0 {

label = "u-boot";

reg = <0x0 0xc0000 >;

};

partition@c0000 {

label = "u-boot-env";

reg = <0xc0000 0x40000>;

};

partition@100000 {

label = "dtb";

reg = <0x100000 0x080000>;

};

partition@180000 {

label = "kernel";

reg = <0x180000 0x500000>;

};

partition@680000 {

label = "rootfs";

reg = <0x680000 0x3f980000 >; //最大1G

};

};

};

};

&keypad {

linux,input-no-autorepeat;

wakeup-source;

samsung,keypad-num-rows = <8>;

samsung,keypad-num-columns = <8>;

pinctrl-names = "default";

pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,

<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,

<&keypad_row6>, <&keypad_row7>,

<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,

<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,

<&keypad_col6>, <&keypad_col7>;

status = "okay";

key_1 {

keypad,row = <0>;

keypad,column = <3>;

linux,code = ;

};

key_2 {

keypad,row = <0>;

keypad,column = <4>;

linux,code = ;

};

key_3 {

keypad,row = <0>;

keypad,column = <5>;

linux,code = ;

};

key_4 {

keypad,row = <0>;

keypad,column = <6>;

linux,code = ;

};

key_5 {

keypad,row = <0

>;

keypad,column = <7>;

linux,code = ;

};

key_6 {

keypad,row = <1>;

keypad,column = <3>;

linux,code = ;

};

key_7 {

keypad,row = <1>;

keypad,column = <4>;

linux,code = ;

};

key_8 {

keypad,row = <1>;

keypad,column = <5>;

linux,code = ;

};

key_9 {

keypad,row = <1>;

keypad,column = <6>;

linux,code = ;

};

key_10 {

keypad,row = <1>;

keypad,column = <7>;

linux,code = ;

};

};

&uart0 {

status = "okay";

};

&uart1 {

status = "okay";

};

&uart2 {

status = "okay";

};

&uart3 {

status = "okay";

};

&rtc {

status = "okay";

};

&sdhci0 {

bus-width = <4>;

pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;

pinctrl-names = "default";

status = "okay";

};

&sdhci1 {

bus-width = <4>;

pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;

pinctrl-names = "default";

status = "okay";

};

&sdhci2 {

bus-width = <4>;

pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;

pinctrl-names = "default";

status = "okay";

};

&sdhci3 {

bus-width = <4>;

pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;

pinctrl-names = "default";

status = "okay";

};

&hsotg {

dr_mode = "peripheral";

status = "okay";

};

&usbphy {

status = "okay";

};

&fimd {

pinctrl-0 = <&lcd_clk &lcd_data24>;

pinctrl-names = "default";

status = "okay";

display-timings {

native-mode = <&timing0>;

timing0: timing {

/* 800x480@60Hz */

clock-frequency = <24373920>;

hactive = <800>;

vactive = <480>;

hfront-porch = <8>;

hback-porch = <13>;

hsync-len = <3>;

vback-porch = <7>;

vfront-porch = <5>;

vsync-len = <1>;

hsync-active = <0>;

vsync-active = <0>;

de-active = <1>;

pixelclk-active = <1>;

};

};

};

&pwm {

samsung,pwm-outputs = <3>;

};

&i2c0 {

status = "okay";

audio-codec@1b {

compatible = "wlf,wm8580";

reg = <0x1b>;

};

eeprom@50 {

compatible = "atmel,24c08";

reg = <0x50>;

};

};

&i2s0 {

status = "okay";

};

第二个,dtsi

// SPDX-License-Identifier: GPL-2.0

/*

* Samsung's S5PV210 SoC device tree source

*

* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.

*

* Mateusz Krawczuk

* Tomasz Figa

*

* Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210

* based board files can include this file and provide values for board specfic

* bindings.

*

* Note: This file does not include device nodes for all the controllers in

* S5PV210 SoC. As device tree coverage for S5PV210 increases, additional

* nodes can be added to this file.

*/

#include

#include

/ {

#address-cells = <1>;

#size-cells = <1>;

aliases {

csis0 = &csis0;

fimc0 = &fimc0;

fimc1 = &fimc1;

fimc2 = &fimc2;

i2c0 = &i2c0;

i2c1 = &i2c1;

i2c2 = &i2c2;

i2s0 = &i2s0;

i2s1 = &i2s1;

i2s2 = &i2s2;

pinctrl0 = &pinctrl0;

spi0 = &spi0;

spi1 = &spi1;

};

cpus {

#address-cells = <1>;

#size-cells = <0>;

cpu@0 {

device_type = "cpu";

compatible = "arm,cortex-a8";

reg = <0>;

};

};

soc {

compatible = "simple-bus";

#address-cells = <1>;

#size-cells = <1>;

ranges;

external-clocks {

compatible = "simple-bus";

#address-cells = <1>;

#size-cells = <0>;

xxti: oscillator@0 {

compatible = "fixed-clock";

reg = <0>;

clock-frequency = <0>;

clock-output-names = "xxti";

#clock-cells = <0>;

};

xusbxti: oscillator@1 {

compatible = "fixed-clock";

reg = <1>;

clock-frequency = <0>;

clock-output-names = "xusbxti";

#clock-cells = <0>;

};

};

onenand: onenand@b0000000 {

compatible = "samsung,s5pv210-onenand";

reg = <0xb0600000 0x2000>,

<0xb0000000 0x20000>,

<0xb0040000 0x20000>;

interrupt-parent = <&vic1>;

interrupts = <31>;

clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;

clock-names = "bus", "onenand";

#address-cells = <1>;

#size-cells = <1>;

status = "disabled";

};

chipid@e0000000 {

compatible = "samsung,s5pv210-chipid";

reg = <0xe0000000 0x1000>;

};

clocks: clock-controller@e0100000 {

compatible = "samsung,s5pv210-clock";

reg = <0xe0100000 0x10000>;

clock-names = "xxti", "xusbxti";

clocks = <&xxti>, <&xusbxti>;

#clock-cells = <1>;

};

pmu_syscon: syscon@e0108000 {

compatible = "samsung-s5pv210-pmu", "syscon";

reg = <0xe0108000 0x8000>;

};

pinctrl0: pinctrl@e0200000 {

compatible = "samsung,s5pv210-pinctrl";

reg = <0xe0200000 0x1000>;

interrupt-parent = <&vic0>;

interrupts = <30>;

wakeup-interrupt-controller {

compatible = "samsung,exynos4210-wakeup-eint";

interrupts = <16>;

interrupt-parent = <&vic0>;

};

};

pdma0: dma@e0900000 {

compatible = "arm,pl330", "arm,primecell";

reg = <0xe0900000 0x1000>;

interrupt-parent = <&vic0>;

interrupts = <19>;

clocks = <&clocks CLK_PDMA0>;

clock-names = "apb_pclk";

#dma-cells = <1>;

#dma-channels = <8>;

#dma-requests = <32>;

};

pdma1: dma@e0a00000 {

compatible = "arm,pl330", "arm,primecell";

reg = <0xe0a00000 0x1000>;

interrupt-parent = <&vic0>;

interrupts = <20>;

clocks = <&clocks CLK_PDMA1>;

clock-names = "apb_pclk";

#dma-cells = <1>;

#dma-channels = <8>;

#dma-requests = <32>;

};

spi0: spi@e1300000 {

compatible = "samsung,s5pv210-spi";

reg = <0xe1300000 0x1000>;

interrupt-parent = <&vic1>;

interrupts = <15>;

dmas = <&pdma0 7>, <&pdma0 6>;

dma-names = "tx", "rx";

clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;

clock-names = "spi", "spi_busclk0";

pinctrl-names = "default";

pinctrl-0 = <&spi0_bus>;

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

};

spi1: spi@e1400000 {

compatible = "samsung,s5pv210-spi";

reg = <0xe1400000 0x1000>;

interrupt-parent = <&vic1>;

interrupts = <16>;

dmas = <&pdma1 7>, <&pdma1 6>;

dma-names = "tx", "rx";

clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;

clock-names = "spi", "spi_busclk0";

pinctrl-names = "default";

pinctrl-0 = <&spi1_bus>;

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

};

keypad: keypad@e1600000 {

compatible = "samsung,s5pv210-keypad";

reg = <0xe1600000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <25>;

clocks = <&clocks CLK_KEYIF>;

clock-names = "keypad";

status = "disabled";

};

i2c0: i2c@e1800000 {

compatible = "samsung,s3c2440-i2c";

reg = <0xe1800000 0x1000>;

interrupt-parent = <&vic1>;

interrupts = <14>;

clocks = <&clocks CLK_I2C0>;

clock-names = "i2c";

pinctrl-names = "default";

pinctrl-0 = <&i2c0_bus>;

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

};

i2c2: i2c@e1a00000 {

compatible = "samsung,s3c2440-i2c";

reg = <0xe1a00000 0x1000>;

interrupt-parent = <&vic1>;

interrupts = <19>;

clocks = <&clocks CLK_I2C2>;

clock-names = "i2c";

pinctrl-0 = <&i2c2_bus>;

pinctrl-names = "default";

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

};

clk_audss: clock-controller@eee10000 {

compatible = "samsung,s5pv210-audss-clock";

reg = <0xeee10000 0x1000>;

clock-names = "hclk", "xxti",

"fout_epll",

"sclk_audio0";

clocks = <&clocks DOUT_HCLKP>, <&xxti>,

<&clocks FOUT_EPLL>,

<&clocks SCLK_AUDIO0>;

#clock-cells = <1>;

};

i2s0: i2s@eee30000 {

compatible = "samsung,s5pv210-i2s";

reg = <0xeee30000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <16>;

dma-names = "rx", "tx", "tx-sec";

dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;

clock-names = "iis",

"i2s_opclk0",

"i2s_opclk1";

clocks = <&clk_audss CLK_I2S>,

<&clk_audss CLK_I2S>,

<&clk_audss CLK_DOUT_AUD_BUS>;

samsung,idma-addr = <0xc0010000>;

pinctrl-names = "default";

pinctrl-0 = <&i2s0_bus>;

#sound-dai-cells = <0>;

status = "disabled";

};

i2s1: i2s@e2100000 {

compatible = "samsung,s3c6410-i2s";

reg = <0xe2100000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <17>;

dma-names = "rx", "tx";

dmas = <&pdma1 12>, <&pdma1 13>;

clock-names = "iis", "i2s_opclk0";

clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;

pinctrl-names = "default";

pinctrl-0 = <&i2s1_bus>;

#sound-dai-cells = <0>;

status = "disabled";

};

i2s2: i2s@e2a00000 {

compatible = "samsung,s3c6410-i2s";

reg = <0xe2a00000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <18>;

dma-names = "rx", "tx";

dmas = <&pdma1 14>, <&pdma1 15>;

clock-names = "iis", "i2s_opclk0";

clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;

pinctrl-names = "default";

pinctrl-0 = <&i2s2_bus>;

#sound-dai-cells = <0>;

status = "disabled";

};

pwm: pwm@e2500000 {

compatible = "samsung,s5pc100-pwm";

reg = <0xe2500000 0x1000>;

interrupt-parent = <&vic0>;

interrupts = <21>, <22>, <23>, <24>, <25>;

clock-names = "timers";

clocks = <&clocks CLK_PWM>;

#pwm-cells = <3>;

};

watchdog: watchdog@e2700000 {

compatible = "samsung,s3c6410-wdt";

reg = <0xe2700000 0x1000>;

interrupt-parent = <&vic0>;

interrupts = <26>;

clock-names = "watchdog";

clocks = <&clocks CLK_WDT>;

};

rtc: rtc@e2800000 {

compatible = "samsung,s3c6410-rtc";

reg = <0xe2800000 0x100>;

interrupt-parent = <&vic0>;

interrupts = <28>, <29>;

clocks = <&clocks CLK_RTC>;

clock-names = "rtc";

status = "disabled";

};

uart0: serial@e2900000 {

compatible = "samsung,s5pv210-uart";

reg = <0xe2900000 0x400>;

interrupt-parent = <&vic1>;

interrupts = <10>;

clock-names = "uart", "clk_uart_baud0",

"clk_uart_baud1";

clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,

<&clocks SCLK_UART0>;

status = "disabled";

};

uart1: serial@e2900400 {

compatible = "samsung,s5pv210-uart";

reg = <0xe2900400 0x400>;

interrupt-parent = <&vic1>;

interrupts = <11>;

clock-names = "uart", "clk_uart_baud0",

"clk_uart_baud1";

clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,

<&clocks SCLK_UART1>;

status = "disabled";

};

uart2: serial@e2900800 {

compatible = "samsung,s5pv210-uart";

reg = <0xe2900800 0x400>;

interrupt-parent = <&vic1>;

interrupts = <12>;

clock-names = "uart", "clk_uart_baud0",

"clk_uart_baud1";

clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,

<&clocks SCLK_UART2>;

status = "disabled";

};

uart3: serial@e2900c00 {

compatible = "samsung,s5pv210-uart";

reg = <0xe2900c00 0x400>;

interrupt-parent = <&vic1>;

interrupts = <13>;

clock-names = "uart", "clk_uart_baud0",

"clk_uart_baud1";

clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,

<&clocks SCLK_UART3>;

status = "disabled";

};

sromc: memory-controller@e8000000 { //2022-0103 dazhi add

compatible = "samsung,exynos4210-srom";

reg = <0xe8000000 0x1c>;

#address-cells = <2>;

#size-cells = <1>;

ranges = <0 0 0x80000000 0x8000000

1 0 0x88000000 0x8000000

2 0 0xb0e00000 0xb0e20130

3 0 0x98000000 0x8000000

4 0 0xa0000000 0x8000000

5 0 0xa8000000 0x8000000>;

clocks = <&clocks CLK_SROMC>;

clock-names = "sromc";

status = "disabled";

};

nandc: nand-controller@b0e00000 {

compatible = "samsung,s5pv210-nand";

reg = <0xb0e00000 0x00020130>;

status = "disabled";

clocks = <&clocks CLK_NFCON>;

clock-names = "nand";

#address-cells = <1>;

#size-cells = <1>;

};

sdhci0: sdhci@eb000000 {

compatible = "samsung,s3c6410-sdhci";

reg = <0xeb000000 0x100000>;

interrupt-parent = <&vic1>;

interrupts = <26>;

clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";

clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,

<&clocks SCLK_MMC0>;

status = "disabled";

};

sdhci1: sdhci@eb100000 {

compatible = "samsung,s3c6410-sdhci";

reg = <0xeb100000 0x100000>;

interrupt-parent = <&vic1>;

interrupts = <27>;

clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";

clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,

<&clocks SCLK_MMC1>;

status = "disabled";

};

sdhci2: sdhci@eb200000 {

compatible = "samsung,s3c6410-sdhci";

reg = <0xeb200000 0x100000>;

interrupt-parent = <&vic1>;

interrupts = <28>;

clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";

clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,

<&clocks SCLK_MMC2>;

status = "disabled";

};

sdhci3: sdhci@eb300000 {

compatible = "samsung,s3c6410-sdhci";

reg = <0xeb300000 0x100000>;

interrupt-parent = <&vic3>;

interrupts = <2>;

clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";

clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,

<&clocks SCLK_MMC3>;

status = "disabled";

};

hsotg: hsotg@ec000000 {

compatible = "samsung,s3c6400-hsotg";

reg = <0xec000000 0x20000>;

interrupt-parent = <&vic1>;

interrupts = <24>;

clocks = <&clocks CLK_USB_OTG>;

clock-names = "otg";

phy-names = "usb2-phy";

phys = <&usbphy 0>;

status = "disabled";

};

usbphy: usbphy@ec100000 {

compatible = "samsung,s5pv210-usb2-phy";

reg = <0xec100000 0x100>;

samsung,pmureg-phandle = <&pmu_syscon>;

clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;

clock-names = "phy", "ref";

#phy-cells = <1>;

status = "disabled";

};

ehci: ehci@ec200000 {

compatible = "samsung,exynos4210-ehci";

reg = <0xec200000 0x100>;

interrupts = <23>;

interrupt-parent = <&vic1>;

clocks = <&clocks CLK_USB_HOST>;

clock-names = "usbhost";

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

port@0 {

reg = <0>;

phys = <&usbphy 1>;

};

};

ohci: ohci@ec300000 {

compatible = "samsung,exynos4210-ohci";

reg = <0xec300000 0x100>;

interrupts = <23>;

interrupt-parent = <&vic1>;

clocks = <&clocks CLK_USB_HOST>;

clock-names = "usbhost";

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

port@0 {

reg = <0>;

phys = <&usbphy 1>;

};

};

mfc: codec@f1700000 {

compatible = "samsung,mfc-v5";

reg = <0xf1700000 0x10000>;

interrupt-parent = <&vic2>;

interrupts = <14>;

clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;

clock-names = "sclk_mfc", "mfc";

};

vic0: interrupt-controller@f2000000 {

compatible = "arm,pl192-vic";

interrupt-controller;

reg = <0xf2000000 0x1000>;

#interrupt-cells = <1>;

};

vic1: interrupt-controller@f2100000 {

compatible = "arm,pl192-vic";

interrupt-controller;

reg = <0xf2100000 0x1000>;

#interrupt-cells = <1>;

};

vic2: interrupt-controller@f2200000 {

compatible = "arm,pl192-vic";

interrupt-controller;

reg = <0xf2200000 0x1000>;

#interrupt-cells = <1>;

};

vic3: interrupt-controller@f2300000 {

compatible = "arm,pl192-vic";

interrupt-controller;

reg = <0xf2300000 0x1000>;

#interrupt-cells = <1>;

};

fimd: fimd@f8000000 {

compatible = "samsung,exynos4210-fimd";

interrupt-parent = <&vic2>;

reg = <0xf8000000 0x20000>;

interrupt-names = "fifo", "vsync", "lcd_sys";

interrupts = <0>, <1>, <2>;

clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;

clock-names = "sclk_fimd", "fimd";

status = "disabled";

};

g2d: g2d@fa000000 {

compatible = "samsung,s5pv210-g2d";

reg = <0xfa000000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <9>;

clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;

clock-names = "sclk_fimg2d", "fimg2d";

};

mdma1: mdma@fa200000 {

compatible = "arm,pl330", "arm,primecell";

reg = <0xfa200000 0x1000>;

interrupt-parent = <&vic0>;

interrupts = <18>;

clocks = <&clocks CLK_MDMA>;

clock-names = "apb_pclk";

#dma-cells = <1>;

#dma-channels = <8>;

#dma-requests = <1>;

};

i2c1: i2c@fab00000 {

compatible = "samsung,s3c2440-i2c";

reg = <0xfab00000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <13>;

clocks = <&clocks CLK_I2C1>;

clock-names = "i2c";

pinctrl-names = "default";

pinctrl-0 = <&i2c1_bus>;

#address-cells = <1>;

#size-cells = <0>;

status = "disabled";

};

camera: camera {

compatible = "samsung,fimc", "simple-bus";

pinctrl-names = "default";

pinctrl-0 = <>;

clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;

clock-names = "sclk_cam0", "sclk_cam1";

#address-cells = <1>;

#size-cells = <1>;

ranges;

clock_cam: clock-controller {

#clock-cells = <1>;

};

csis0: csis@fa600000 {

compatible = "samsung,s5pv210-csis";

reg = <0xfa600000 0x4000>;

interrupt-parent = <&vic2>;

interrupts = <29>;

clocks = <&clocks CLK_CSIS>,

<&clocks SCLK_CSIS>;

clock-names = "clk_csis",

"sclk_csis";

bus-width = <4>;

status = "disabled";

#address-cells = <1>;

#size-cells = <0>;

};

fimc0: fimc@fb200000 {

compatible = "samsung,s5pv210-fimc";

reg = <0xfb200000 0x1000>;

interrupts = <5>;

interrupt-parent = <&vic2>;

clocks = <&clocks CLK_FIMC0>,

<&clocks SCLK_FIMC0>;

clock-names = "fimc",

"sclk_fimc";

samsung,pix-limits = <4224 8192 1920 4224>;

samsung,mainscaler-ext;

samsung,cam-if;

};

fimc1: fimc@fb300000 {

compatible = "samsung,s5pv210-fimc";

reg = <0xfb300000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <6>;

clocks = <&clocks CLK_FIMC1>,

<&clocks SCLK_FIMC1>;

clock-names = "fimc",

"sclk_fimc";

samsung,pix-limits = <4224 8192 1920 4224>;

samsung,mainscaler-ext;

samsung,cam-if;

};

fimc2: fimc@fb400000 {

compatible = "samsung,s5pv210-fimc";

reg = <0xfb400000 0x1000>;

interrupt-parent = <&vic2>;

interrupts = <7>;

clocks = <&clocks CLK_FIMC2>,

<&clocks SCLK_FIMC2>;

clock-names = "fimc",

"sclk_fimc";

samsung,pix-limits = <4224 8192 1920 4224>;

samsung,mainscaler-ext;

samsung,lcd-wb;

};

};

};

};

#include "s5pv210-pinctrl.dtsi"

查看原文